We would say the worst issue on a smartphone is that if your Redmi Note 10 Pro isn’t switching on, that’s the biggest problem. Because if the screen is blank, black, or the phone doesn’t turn on, you can’t do anything. Despite the fact that this issue doesn’t occur on a large scale, there are some Android users who are experiencing it.
In any case, there are many reasons why this would happen. It could be anything from software to hardware damage, depending on what your Redmi Note 10 Pro has experienced. Of course, software issues are much easier to resolve than hardware ones. Here’s how to fix the Redmi Note 10 Pro not switching on error:
Charge your Redmi Note 10 Pro
There are multiple instances when people forget or do not know that the device’s battery can drain to the point that it cannot even respond to a power button.
The first example is when the battery has drained well beyond the point. As a result, your Redmi Note 10 Pro won’t vibrate as much as it would if the battery were full. The second example is when the phone turned off due to some glitch and you kept on pressing the power button. It turns out that battery juice is used to turn the phone back on, so pressing the power button more and more won’t work.
Simply plug in your Redmi Note 10 Pro for 10-15 minutes to charge, and then try to power it on. That’s it. Check if this works, or else move on to the next method.
Check Power Button [ Redmi Note 10 Pro Not Switching On ]
You need to check that too. Since most phones now have Face Recognition and Fingerprint, you can use either. In contrast to the former, the latter does not require you to press the power button to light up the display. It’s important to press the power button once in order to use Facial Recognition. There are tens of other uses for a power button, so it’s likely to be used often.
It may be damaged or broken as a result. Getting the power button of your Redmi Note 10 Pro replaced will resolve the issue once and for all. Verify if the power button is damaged or not as fixing this issue is a lot cheaper.
Try reviving with a Computer
Using a computer to troubleshoot the phone would be the next logical step.
- You will need to connect your Redmi Note 10 Pro to a PC.
- If possible, wait a few minutes for the battery to charge.
- Disconnect the cable next , after a few seconds, reconnect.
- Check if that helps the battery icon to light up, eventually charging the battery and lighting up the display.
- Charge the battery for another 30 minutes.
- In order to revive the screen, long press the power button.
Verify the Charging Port of your Redmi Note 10 Pro
The next hardware component that you need to verify is the charging port on your Redmi Note 10 Pro aka the female port. You should check whether it is working or not. Also, you should check whether the pins are straight and not bent or broken. If the pins are bent or broken, electricity will not flow from the cable to the battery.
If you need help, you can consult a technician in your area. Also, look for debris or dust inside your phone’s charging port, as that can cause problems as well. In case the old cable wasn’t latching properly to the charging port, you can use a different cable to verify if your phone’s charging port is working properly or not.
What if the Charger Or Cable is the problem
Redmi Note 10 Pro not switching ON could also be a result of a faulty charger or cable. There is a tendency for cables to be abused. Due to the forces they go through, such as twisting, stretching, compressing, and bending, they are subject to failure. You can replace the old cable to verify if the cable is faulty. If either side of the contraption is damaged, such as the charging port/battery or the charging adapter, you can try changing it.
The charging adapter can either be verified at a service center or switched with a new one. If the latter works properly, the old one is to blame. If it does not, it could be the battery, the charging port, or something else wrong with your phone.
The Battery has reached the end of life [ Redmi Note 10 Pro Not Switching On ]
When did you buy your Redmi Note 10 Pro? It’s important to note that every smartphone’s battery has a limited life and gradually decreases in performance, depending on the circumstances. Because of this, you won’t be comparing the battery backup you got initially to what you are getting now. It may be that the battery has run its course. Therefore, now is the time to replace it.
However, if the phone is used too much (which causes frequent charging) or if it is a few years old, this assumption may not be accurate. You can get the problem diagnosed and check whether the battery’s life has ended or not. You might find that buying a new battery is cheaper than fixing the same Redmi Note 10 Pro that won’t switch on due to a display problem. If not, continue reading the article.
Check whether the Display is fine
It is quite possible that your Redmi Note 10 Pro doesn’t switch on because the display has been damaged. It’s quite possible that you dropped the phone or dropped something on it that caused the display to malfunction. It is likely that the display has been damaged in both cases and will need to be fixed by a technician.
Are there any signs of Liquid Damage?
Identifying any damage caused by water or any other liquid on your Redmi Note 10 Pro is crucial to verifying hardware components. It will damage it based on the severity of the contact. You can actually remove the back cover (if possible) to check for indicators placed strategically on the upper and lower portions of the back panel. If it is discolored, your phone is likely to have been damaged by water.
The damage created by liquid will need to be repaired. This will require you to pay a service center or technician. But it’s something you have to do if you want to keep your Redmi Note 10 Pro.
Take it to the Service Center [ Redmi Note 10 Pro Not Switching On ]
When you still have trouble lighting up the screen, it is time to visit a local or authorized service center and get it professionally diagnosed. Based on the response you get from the technician, you can take a call. He/she will help you determine what’s wrong with your Redmi Note 10 Pro and how to get it started if it is still possible.
Wrapping up
That being said, you should finally be able to revive your Redmi Note 10 Pro from the Black Screen of Death. Hopefully, most phones will be able to recover themselves unless they have been damaged beyond repair.
Also read: Redmi Note 10 Pro Overheating? Here’s a fix